Get started with your Bamboo Stylus fineline

It’s time to take notes to a new level, to design, diagram, doodle… Here’s where to learn how to set up your stylus and pair it with some great apps.

Meet your stylus.

Plug in your stylus (USB)

Charge for 2 hours

Rechargeable battery lasts up to 26 hours

然后,检查固件更新是否可用于您的触控笔。

为了确保您的触控笔表现良好,我们有一个易于使用的应用程序为您的iPad。它可以帮助您检查和更新触控笔的固件。

Wacom Stylus Update App Icon 100x100

Next, install an app.

  • Palm-Rejection
  • Pressure-Sensitivity
  • Shortcut-Functionality

Now, pair the app with your stylus.

1. Open your iPad settings.

2.激活 Bluetooth。

3. In "General" settings, switch off "Multitasking Gestures" for optimal palm rejection and stable connections.

4. Open a compatible app.

5.打开应用程序的设置以启用触控笔支持。

6.按下触控笔上的侧面开关。蓝色指示灯开始闪烁。当 LED 亮灯持续两秒时,即表示配对完成。

7. Repeat steps 4-6 when pairing with another app.

Pairing your Bamboo Fineline 2 with the Bamboo Paper app will unlock the bonus fineline pack.

Dropzone

Easily copy & paste images between apps & devices.
Dropzone enables you to have your images everywhere, on your tablet or desktop computer. On Mac OS, Windows and iOS.

Learn more

需要帮助?

  • 访问我们的支持部分

    注册产品后,您以后就能获得最新的更新消息

    服务支持

常见问题

This effect appears only on iPad Air and iPad Mini Retina. You can avoid this by accelerating your drawing speed.
The side switch works as a shortcut button. In most apps, you can select from a range of functions and assign one to the side switch: e.g., in Bamboo Paper, you can choose between eraser, undo, redo and full screen.
When the battery capacity of the Bamboo Stylus fineline reaches 10%, the LED starts to blink red and you will need to recharge. To do so, remove the cap at the top end of the stylus, insert the USB cable (included in the sales box) and connect it to a computer or USB charger. It takes about one hour to recharge to 80% capacity. To reach 100% capacity, you need about two hours of recharging.
The new material of the nib is very durable and long-lasting. You can draw over 100 km of lines with it on an iPad screen. Replacement nibs can be purchased at the Wacom eStore.
Please disable Multitasking Gestures on your iPad in Settings/General.

The LED lights give you the status of your stylus, informing you about pairing, connecting or a low battery. There are two colors, blue and red, and the lights can either be solid or blink. Here is an overview of what this means in detail:

  • Blinking blue light = Stylus is ready to connect with the app
  • Blue light solid for two seconds = Stylus is connected with the app
  • Blinking red light = Low battery
  • Red light solid = Battery is recharging
  • Blue light remains on = Stylus is connected with the app (Fineline 2)
As only supported apps have the ability to properly correct this gap, please make sure that you are using a supported app. If you use non-supported apps, you can minimize this effect by holding the stylus in a more vertical way.
Back to top
A+ A-